This Toyota Tundra became Australia’s first MITS Alloy Tundra build, with the setup planned around touring, storage, power and everyday usability.
Rather than treating each part of the build separately, the tray, canopy, electrical, storage and touring equipment were all planned to work together from the beginning.
Starting With the MITS Alloy Tray and Canopy
At the centre of the build is a full MITS Alloy tray and canopy package.
The full length canopy gives the Tundra plenty of usable space, while the spare wheel has been mounted at the rear.
Inside, the layout has been kept practical, with dedicated storage as well as some open space for larger touring gear such as camp chairs, tables, shovels and family gear.
That balance is important on a touring build. Not everything needs to live in a drawer, and having some flexible space makes the canopy easier to use once the vehicle is fully packed.
A Layout Built Around How the Space Is Used
The passenger side is set up with a Dometic 115L upright fridge, together with a single drawer and table.
On the driver’s side, a double drawer system provides additional organised storage, while the rear trundle drawer adds another useful storage area.
The build also includes 30L of water storage integrated into the setup.
Combined, these elements give the canopy a good mix of food storage, general storage, water and usable bench space without overcomplicating the layout.
Power Built Into the Touring Setup
The Tundra runs a REDARC Ultimate electrical package, giving the canopy a dedicated power system for touring.
The setup includes solar to help keep the fridge and other 12V equipment running while travelling or when the vehicle is parked up.
With the electrical system planned as part of the build from the beginning, the power setup works alongside the fridge, storage and other touring equipment rather than being added later as an afterthought.
Onboard Air Where It Makes Sense
An ARB Twin Compressor has been mounted inside the undertray toolbox.
This keeps it easy to access while keeping the main canopy layout simple.
The position also allows the air hose to reach around the vehicle and any trailer being towed, which makes it a practical location for a touring setup.
Making Use of the Canopy Exterior
The MITS Alloy Multi Racks give the Tundra additional mounting options on top of the canopy.
They’ve been used to support equipment including the solar panel, while a dedicated MITS Alloy bracket has also been fitted for a Starlink Mini setup.
It’s another part of the build that helps keep the touring setup organised and ready to use.
Lighting for the Tundra
Up front, Bushranger Night Hawk ADV driving lights have been added to the setup.
The lights combine spot and flood patterns, giving the Tundra a versatile lighting setup for night driving and regional travel.
Why This Build Stands Out
Being Australia’s first MITS Alloy Toyota Tundra build makes this one significant, but the setup itself is what makes it useful.
The tray and canopy, storage, fridge, water, electrical, onboard air and exterior mounting systems have all been planned around the same goal: creating a touring setup that is practical to live with and easy to use.
It’s a good example of what can be achieved when the whole build is considered together from the start.
Planning a Toyota Tundra or MITS Alloy Build?
If you’re planning a Toyota Tundra build or considering a MITS Alloy tray and canopy setup, book an appointment with the team at ARB Rockingham.
We can help plan the layout around your storage, electrical, fridge, onboard air and touring requirements so the finished setup works for the way you intend to use the vehicle.
You can also watch the full Tundra walkthrough on our YouTube channel for a closer look at how the build has been laid out.
